AMG Medical Physio logic Instruction Manual download pdf (Page 9)

Applying the Arm Cuff

1. Insert the cuff’s connecting tube into the unit.

2. Unwrap the arm cuff, leaving the “Index” end of the cuff through

the D-ring of the cuff.

3. Put your left arm through the cuff loop. Position the artery mark

( ) at the middle of your arm above the elbow, in line with your

middle finger. Tighten the cuff by pulling the “Index” end of the

cuff (snug, not tight).

4. Turn your left palm upward

and place the edge of the arm

cuff at approximately 2 to 3

cm above the

inner side of the elbow joint.

5. If the Index line falls within

the OK range, indicated at the

edge of the cuff, this cuff is

suitable for your use. If the

Index line falls out of the OK

range, you may need a

different size cuff.

(0.8” - 1.2”)

INDEX

2 3 cm / 0,8” 1,2”

1 2 3 4 5 6 7 8 9 10 11 12

No comments

AMG Medical Physio logic Instruction Manual Page 9