AMG Medical Physio logic Instruction Manual download pdf (Page 14)

Troubleshooting

Symptom: No display when the On / Off / Start button is pressed.

Correction: If the batteries have run down, replace them with

new alkaline batteries. If the batteries are not in the correct

position, re-insert them with the correct polarities.

Symptom: EE mark shown on display or the blood pressure value

is displayed excessively low (high).

Correction: Wrap the cuff properly so that it is positioned

correctly. If you talked or moved during the measurement, measure

again quietly.

Note: If the unit does not work, please call our consumer

information line at 1-800-363-2381. Under no circumstance

should you disassemble the unit and attempt repairs.

Cautionary Notes

1. Avoid extreme temperatures, humidity, and direct sunlight.

Avoid strongly shocking the main unit, and protect it from dust.

2. Clean the blood pressure monitor body and the cuff carefully

with a slightly damp, soft cloth. Do not press. Do not wash the

cuff or use chemical cleaner.

3. Remove the batteries when the unit is not used for a long time.

4. The unit should not be operated by children.

5. Do not disassemble the main unit or cuff.

6. This device might not be suitable for use by people with poor

blood circulation, common arrhythmias, such as atrial or

ventricular premature beats or atrial fibrillation. It is not

designed for ambulatory use.

7. To stop operation at any time, press the Start key and the air in

the cuff will be rapidly exhausted..

1 2 ... 9 10 11 12 13 14 15 16

No comments

AMG Medical Physio logic Instruction Manual Page 14